首页 > 平垫片垫圈华司 > DIN6916硬度平垫圈 > DIN 6916 - 1989-钢结构高强度螺栓连接—平垫圈

分享商品:

DIN 6916 - 1989-钢结构高强度螺栓连接—平垫圈

DIN 6916 - 1989 DIN EN 14399(-6) - 2015 等效标准 国标GB国际ISO德标DIN欧标EN GB /T 18230.5 ISO 7416 DIN EN 14399(-6) EN 14399

本店价:¥0.00

市场价:¥0.00
会员购买享有折扣

会员价格

会员等级 会员价格
支付宝用户 ¥0.00
微信用户 ¥0.00
已售出 0 件|0 人评价

规格参数

产品名称 : DIN 6916 - 1989-钢结构高强度螺栓连接—平垫圈
产品品牌 : 卡勒屿金

产品介绍

Structural Washers, DIN 6916 / EN 14399 Part 6

The information below lists the required dimensional, chemical and physical characteristics of Hardened&Structural Washers, DIN6916/EN14399 Part 6, in this purchase order.  If the order received does not meet these requirements, it may result in a supplier corrective action request, which could jeopardize your status as an approved vendor.  Unless otherwise specified, all referenced consensus standards must be adhered to in their entirety.

 

Specification Requirements:

● Dimensions and Workmanship:DIN 6916,EN 14399 Part 6

● Material and Mechanical Properties:

    Carbon Steel quenched and tempered to 300-370 HV

    (Approximate conversion 32-40 HRC)

● Available Finishes:

    – Plain w/light protective oil.

    – Hot Dip Galvanized (HDG).

    – Dacromet

    – Customized.

● Material Test Report:

    The MTR must have documented lot traceability, including full chemical and mechanical figures, to the specification(s) above.

 

商品评价
  • 0%

    好评度

  • 好评(0%)
    中评(0%)
    差评(0%)
  • 全部评价(0)
  • 好评(0)
  • 中评(0)
  • 差评(0)
  • 用户晒单(0)

DIN 6916 - 1989-钢结构高强度螺栓连接—平垫圈

商品已成功加入购物车
<<继续购物 去结算
共执行 235 个查询,用时 0.290957 秒,在线 162 人,Gzip 已禁用,占用内存 5.254 MB